Filter Quickly by Topic

Saturday, March 26, 2011

Phi Security and It's Features
Phi Security is a sophisticated yet easy to use security system that provides a number of features to secure your property in Second Life.  It works by having a central security system and one or more security zones that are projected by orbs spread throughout your parcel and each of your skyboxes.  A single orb can project a region 96m in size although we recommend that each orb protects only 30m at a time.  The only reason is that we use a particle field to denote the boundary of the security perimeter and this doesn't work beyond 30m.

Phi Security implements the following features:

  • Sophisticated hierarchical dialog system that allows easy navigation, and allows a user to go into menus and back out of menus.
  • Uses a timeout dialog system to prevent an unauthorized user from hijacking an authorized users security session.
  • Security ignores the land owner, so no security settings in the main system can prevent the owner from accessing the property.
    • Important Note: In order for the security system to eject or teleport home an unwanted guest, the land owner must install each security orb.
  • Define the radius of protection for a single orb independently of other orbs.
  • Control security from a single location and one or more security orbs to protect as many buildings as you want.  Great for individual owners who have ground and several skybox locations. 
  • Define which individual buildings an avatar has access to.  Not all buildings need to have access to all avatars.
  • Allow avatars the extra ability to define access for others.  This means they can add/remove/change the authority of any user in the system.  
    • As well, they can turn the system off for a few minutes to hours to allow a party to occur on the property without having to define all the individual party goers.
  • Allow avatars the extra ability to configure the security system:
    • Update security orb settings.
    • Define the delay between avatar warning and when they are ejected or sent home.
    • Define whether uninvited guests are sent home or simply ejected from the parcel.
    • Get a security report on the settings of the system.
  • Add new avatars to the system by entering their user names in Local Chat or turning the system off temporarily and using a sensor then get their names from a dialog box.
  • Define security for the general public.
  • Ban avatars on an individual basis.  Banned avatars get ejected/sent home immediately without warning.  It's recommended that if they continue to violate the security that they be banned from the land parcel using the SL Land Options.




Security Management for Avatars with Access Levels
To set the security for Phi, begin by selecting the security panel:


This brings up the main menu.


Next select "Add AV... to add a new avatar to the system:


Selecting "by Sensor" allows one to select any avatar within a 20m radius of the security system:


Simply click the avatars to add.  Only avatars not already in the system are listed.  If there are none, they are already defined or not close enough to the menu system.  Click back, then click by "By Text".  Type the user name of the avatar to add.  Make sure you are using their user name (with a space) and not their display name.  Enter in as many avatars as needed.  The type BACK or touch the security control box.


From the next menu, click "Change AV" to change the access of the individuals you have defined.  This menu is accessed from the "Add AV" menu or the main menu.



For regular users, simply select the security areas they have access.  "+" next to a name means they don't have that item and clicking it will give it to them.  Conversely "-" next to a name removes that access.  Be careful with the "BANNED" entry.  If it is you, you can instantly ban yourself and need the Land Owner to give you a hard time about it before fixing the problem.


When setting security for the general public all the options are the same except that BANNED is not available:






The final option is to specify how long you want the security system to be off for.  On the main menu you can set it off for 10 minutes while you TP in a guest and set their security.  Otherwise, if you are throwing a party lasting a few hours, the security system can be turned off for several hours. 



Important Note: It's not possible to turn security off permanently except by removing the central security object.  This allows one to set a reasonable time, then have it automatically come back on without worrying about security.  Such as being unable to log back into SL.




Configuration Settings
  • EJECT MODE - defines how avatars are removed from the parcel.
  • UPDATE++ - refreshes the list of orbs in the system.  Used after a new one is added.
  • WARNING - Defines how much time an uninvited avatar has to get off the property if they aren't banned.
  • TURN OFF - Turn off the security system.  Same menu as above.
  • GET HELP - This page.
  • SECURITY RPT - Get a report on the security.




Setting the removal method:


Setting the warning time:

The Security Report:



































































































Tuesday, March 8, 2011

Introduction to live DJing with Virtual DJ

This is the next instalment in the series on how to DJ in Second Life.  In previous blogs, I described Repear and Winamp, but I've put all those aside for my new favourite tool, Virtual DJ.  This $49 software gives me everything I need to DJ live.  You can get more expensive versions of the software all the way up to $300, but the $49 Broadcaster version does the trick.  At first I used it to have an intelligent mix of tracks, and a nice smooth transition from one track to the other.  These days, I am playing, looping and remixing tunes live and have had a ton of fun each time, I won't go back to just playing tracks.

Virtual DJ an Overview

At first glace, Virtual DJ (VDJ) is a bit overwhelming:


There is a lot going on in this interface, but now that I'm used to it, I can say that it's well thought out.  VDJ's interface is skinnable, and this is a snapshot of the 4-deck (1280x1024) interface.  Each deck has it's own settings and they are repeated on each deck:

A simple blog won't go through all the details but this deck tells me the song and gives a song graph.  The white vertical lines in the sound graph are the cues I predetermined, and I use these points so that when I am mixing live, I know where the important bits in the music start and end.

When you play live, you can see a detailed sound graph at the top of the window:



In a live set, you will do live remixing.  This is accomplished by looping a large sections of music within the same tune.  When one section ends, you loop back and replay the same section, and make the sound transition completely seamless. 

To achieve this, you load the same song on the left and right decks and fade between the two.  Notice the position of the colour of the deck in the sound graph.  The right deck (orange) is further along in the play than the left deck (green).  Also notice how the right deck in the top-left corner is highlighted orange.  This is the active deck. 

Note: Above the SYNC button there is a "master" indicator.  When you click the SYNC button, your track adjusts the the master track.  So to do a fade, I first line up the cues then do a SYNC on the green track to solidify the connection.


The important bits from the display are shown below.


The brighter orange (overlays the lighter green), as the Orange part music changes, you can slide the crossfader all the way to the left, to go from the sound on the Orange track to the sound on the Green track.  Practice and the sound style determines how fast to slide it.  With skill, you can now repeat a section and make it as if the music was meant to sound that way.

You can continue to fade back and forth between the two tracks to repeat sections over and over again, and as you practice, you can fade to the beginning, skip entire sections, or automatically repeat sections and listen to the looping part while overlapping some part of the song.

When done right, the sound is entirely seemless and a song, that was on 7 minutes originally, be looped and remixed and last 15-20 minutes, and be completely unique rendition of it each time you play it.

Practice, Practice, Practice

It took about 4-5 hours of practice before I was ready to play for friends.  Even after playing live I still make oopsies, but don't worry about it too much.  It's not like I'll stop the music, write into IM ... I messed up and restarting now.  Just chalk one up and continue.

I do know that it's really hard to play live AND IM at the same time.  So I generally avoid it unless I know I have at least a few minutes.  That's pretty rare, since some sections I am repeating are only 30 seconds long.  Lot of work and concentration.

To DJ Live or Not to DJ Live

I won't go back to just picking a set and playing it.  You can do this, and set it into automix mode and just let VDJ do the fades for you.  But there is simply too much fun and creativity that happens as a result of playing live.  It's always different.

- Gin

Sunday, February 13, 2011

One unstated benefit of using a Saitek Joystick of Machinima

I think one of the biggest problems folks have with using a joystick is they cannot see it working beyond a simple flight controller since it only works with 4 axes.  In SL, you will be able to change which axes are assigned to what for any situation.

When using a Saitek, you do have one huge benefit, and that is using the profile editor:


These are the two buttons that I have set up using the Saitek.  They allow me to turn auto levelling on and off using button controls on the joystick itself. 
Button 3 on the joystick


If you are wondering how they work, Ctrl+Alt+Shift+S -- is the command to bring up the viewer's debug settings.  "AutoL" identifies the "AutoLeveling" setting ... "TAB TAB T" (or F)" moves the mouse to the setting an sets the setting TRUE (or FALSE) depending.

The only requirement is these buttons are programmed as a LATCH.  That means you turn the button on/off.   So to do an auto level, you double tap the button.  Without a LATCH, you have to hold the button down for the duration of the command.  LATCH works much better.

This is hugely useful when flying and you are in a move you need to roll out of.

Sunday, December 12, 2010

How to use iTunes, Winamp and Shoutcast to be a DJ in SL

In a previous blog post, I talked about how to set up Reaper to broadcast into SL.  Reaper is my music composition software (a DAW; Digital Audio Workstation), so I thought it was fortunate that I could go from it straight into SL.

I don't use Reaper any more.  It has it's benefits, but it's disadvantages have been the song information that normally appears on the DJ boards, doesn't appear using the Reaper solution.  Not a problem for me as I do development and to write scripts and code to overcome this problem isn't an issue.  Not technically anyway.  But with Reaper, it took time to go from a DJ Set to that kind of set up, and since I'm lazy ... it took too much time.
These days I use Winamp.  Everything that Reaper was providing for me before, specifically cross fading, can be done with Winamp except I cannot have a live voice over.  Not that I needed it before, I tend to produce a set and play it.  Probably a good thing, I'd end up blabbing the entire time. 

Winamp
So this is my new setup.  A nice diagram kind of gives the full view of how it works; click it to expand.  It's no more complicated than drag-and-dropping of tunes on to a playlist, connecting to Shoutcast, then clicking play in Winamp.  

Once I pick all my songs, I randomize the list a few times, the put my few lead off songs on top and closing songs on the bottom.







The Source of the Plugs-ins are:
  1. SHOUTcast - This transmits tunes from Winamp into a Shoutcast server.  The URL of the server is the Media URL on the land parcel.  You get this plug in from Shoutcast, scroll to the bottom of the page: http://www.streamsolutions.co.uk/downloads/DSPs/shoutcast-dsp-1-9-0-windows.exe (Windows only).
    • Important Note: I had a problem in Windows 7 with the 2.x plug in so the link here is to the 1.9.0 plug in and it seems to be working a lot better.  Now, I don't use a SHOUTcast 2.x server, and this plug-in will not work if you have that version.
  2. Crossfading - This merges the ends of songs with the beginnings of songs so that one fades into the next reducing the amount of dead air that often exists at the start/end of songs.  This plug-in is available in the Winamp media library, but a more up-to-date version is here: "SqrSoft Advanced Crossfading v1.7.6 (http://www.brothersoft.com/sqrsoft-advanced-crossfading-output-197719.html)".  
  3. BigClock - This plug-in is used to know how much time is on a playlist and how much time is left in a set for good transition between on DJ and the next.  This plug-in is obtained here: http://www.winamp.com/plugin/nxs-bigclock/144111 

Configuration


The next stage is to configure the Crossfading Plug In to go into the Shoutcast Plug In.  Start Winamp, and go into Preferences (Ctrl+P), find the Crossfading Plug In, and click Configure:


This brings up the Crossfading Dialog box, and you'll want to go to the DSP tab and set Shoutcast as your output source:

This should bring up the Shoutcast plug in right away, but if it doesn't, click Configure in the middle of the page.  Once you have this plug-in set, you can now specify how you want to encode your music and specify the passwords to your shoutcast server.  If you have been provided a password but no user name, then your shoutcast server is version 1.  Version 2 servers require a user name.  I my case, I'm using version 1, so my configuration looks like this:



I don't broadcast the source to the yellow pages:


And set the Encoder.




I have found that 80kbps 22Khz Stereo is pretty adequate for most people.  Anything more and you're wasting bytes as most people cannot perceive the differences in sound quality.  I only bump it up if people make mention of it.


Playing Your Set


Once you are ready to go.  It's only a matter of connecting to your Shoutcast Server, and clicking Play on Winamp.





























Monday, October 4, 2010

How to use iTunes, Reaper, Shoutcast and an Announcer script to be a professional looking DJ in Second Life

This is going to be one of those work in progress posts that describes how I became a DJ in Second Life. I've wanted to do this for some time, and as it turns out, already had all the tools to do it without one plug-in which I have now obtained.

Firstly, I use an Digital Audio Workstation (DAW) called Reaper (http://reaper.fm). A DAW is an audio composition tool for overlaying multiple sounds. It's what professional composers use to produce the music you listen to, and can run into the thousands of dollars.

Reaper is normally $225, but if you make less than $20,000/year from your music, they will sell you a discounted license for $60. Don't let it's price make you think it is sub-standard; it's amazing quality for what you get. As well, there is new release with new features every 2 weeks, so one license gets dozens of upgrades for free.

For me, I would pay more than $225 for it, because it provides me with features that $1000 DAW give. I started out with Sony ACID Studio and Pro, but found I couldn't run two Virtual Instruments (VSTi) at the same time. I got turned on by the richness of sounds from Spectrasonic's Stylus RMX and Atmosphere (and later Omnisphere), and you can sync the beat track of RMX to Omnisphere. But not having a tool means those programs are worthless.

Reaper is way more functionality than most people need to be a DJ in SL, but it does offer three huge benefits that other posters overlook. Cross Fading, Rendering and Projects. These are all part of Reaper, so there is no need to get a ton of technology and figure out how to make it happen.

Cross Fading is the ability to end one piece of music while beginning another. Doing this can be done graphically ... by simply dragging one piece of music visually over the other and you're done. Cross Fading can be a bit of a challenge if one song has a bunch of silence a the end or at the beginning, so in Reaper it easy to cut stuff off the beginning and end of a song before you do the cross fade.

Rendering is the ability to take your completed show and render it as a single result, and that result can be any in any audio format you want.

Projects are the ability to save your 2 hour sets so that they can be reloaded and played back easily. For me, this means producing a set of shows that I can use in other venues, or at least that's the idea.

Since Reaper is a DAW, I can also remix songs with it. I've never had the need/ability to techno-fy my chill-out music, but with tons of that kind of music it will be an interesting experiment. One of my VSTs is RMX which allows me to overlay beat tracks to the sounds. Omnisphere also has beats, but it's more of a synth designed for smoother sounds, plus millions of combinations of sound possibilities. That means I can mix the sounds together and play them back live into SecondLife for a really special result.


Kbs (Kilobits per Second)

Back in the day when CDs were first created, the CD format allowed for 72 minutes (and later 80) of sound. Rumor has it that it had to be long enough to fit one of Beethoven's symphonies on it uninterrupted.

It used 44,000 Khz and 16-bit stereo sound in a raw format eating up 176,000 bytes per second of CD space, or requiring 725 Mb for the 72 minutes of time. To transmit a byte on the Internet, 2 extra bits are used, so 176,000 bytes/sec, 1,700 Kilo bits per second (Kbs).

That's a lot of bits to push around, and unacceptable as a medium for transmitting sound over the Internet. But since then, different audio formats have come along that use a lot less bits to transmit the music. Seems our ears aren't all that great for hearing the high and low ends of the music, so it's wasteful to transmit them. New formats can stream out a similar but still high quality sound using only 128 Kbp, over 13 times less space.

iTunes

I use iTunes to organize my music library, because it reads most formats and I can convert them into MP3's which I use to broadcast with.  I use a global playlist contains all of the tunes that I create my sets with.  I don't use Genre in iTunes because I have Trance, Dance, Breaks, Progressive House, House, etc. in my sets.

Before you can convert to MP3, you have to tell iTunes that is the format you want.  To set it, go into Edit ::: Preferences, and select Import Settings:



Then from the next dialog, select MP3 Encoder from the "Import Using" drop down:




Next I start playing the play list and go into shuffle mode to play the playlist in random order.  This gives me a random selection of tunes.  If there is a tune I like that isn't MP3, I can convert it to an MP3 version.

Once I have the MP3 Version, I update the "grouping" to identify which music goes into what sets, and I can prevent the same piece of music from being reused so that there is a unique show each time.  By going into "Get Info" (a little further up the menu shown here), and setting the grouping.  Now I can sort by the grouping and see all the music in a set:

This process simplifies the set arrangement process by ensuring that I get all the musical pieces in a single group.  If you want to order the compositions for arrangement, see below, suffix the grouping name with a number like "-01", "-02","-03", and so on.

Once you have a set of music, you can figure out how much time you have for it.  First, make sure you have your music library selected and not a playlist, by selecting Music under Library:


Then select all the tunes in your grouping, and at the bottom of the iTunes window, it will give you this statistic:

If it doesn't give you the precise time, then click the area first to switch the value to an exact time rather than an approximate time.

I always make sure the amount of time is about 2 minutes more than the set time, so that I can handle cross-fades and get the set time to exactly where I want it 2, 3 or 4 hours.

The Annoucer (Optional)

While Shoutcast supports the ability to announce whatever the current tune is, reaper doesn't.  Even if it did, I don't like the detail it gives and a viewer has to be able to support reading the stream.  Therefore I wrote my own shout cast Announcer which is part of my tip jar.  If you want the script, then send me a notecard IM in game and I'll arrange to get it to you.  The script took a lot of time to write and has a fee and will eventually be available in the Second Life Marketplace. 

My song announcer reports this information in this format using the special second life characters:
╔╦═════════════════════════════════════════════════════
║╟─✸ Set: Progressive Dance 1
║╟─✸ Song: 3 of 17
║╟─✸ Name: Endless Candy - Original Mix
║╟─✸ By: Weekend Heroes
║╟─✸ Album: Armada At Ibiza - The Closing Party 2010
╚╩═════════════════════════════════════════════════════
The SET is the name of the set of songs being played, and Album gives the release I got it from so that others can more readily find it.

To get this information into second life requires an export from iTunes and a different one from Reaper.  I then edit the output using OpenOffice and then read the two sets using a Second Life script.

iTunes Export for Announcer (Optional)

The first step is to get all the tunes from the set into a play list.  This is an easy drag-and-drop process to create the playlist.  Once you have the playlist, right click the name and select "Export..." from the menu:
Pick the first option in the type "Text Files (*.txt)" and specify an appropriate name.  I use "ITunes-PLAYLIST" .. so, "ITunes-Progressive Dance 1".



I then export the file again, but instead of saving it, I right-click the file I just created, and use the "Open With" ability and open it in Open Office.  This saves having to fine the file after it is saved.


I then specify the Separator options as Tab:
Then click OK to open the file.  There are are four columns we need from this file, so all the columns except for:
  1. Name
  2. Artist
  3. Album
  4. Location
Are deleted from the file.  Location is used to cross reference a start time in the Reaper file.



IMPORTANT PRIVACY NOTICE: Before continuing to the next step, have a look at the names contained within the Location column.  Since this file will eventually be copied into Second Life, MAKE sure it doesn't contain any personally identifying information.  In my example, I use a separate hard-drive partition (P) to save details about my songs, but many people use "My Documents" and this often contains your real name.  My recommendation is to use a "replace" operation to change the name of any private information.  Whatever modifications you make, they have to be consistent, because the system matches against the FileName column in Reaper against the Location name in iTunes.  If they are not the same, the load fails.  See below.

Review the columns to make sure all the information you want is included, then save the file using the type "Text CSV (.csv)" and remember to check on "Edit Filter Settings":

By clicking on Edit Filter Settings, you get another dialog box.  Specify the field delimiter as a tilda (~) and the text delimiter as nothing:


Then click OK to save the file.



iTunes to Reaper


Now start up Reaper, start a new project, add a track, and drag the all the files to the track in reaper.  In iTunes, click and hold the left-hand mouse button, then drag to the right the files.  This will pop open a drag image identify the number of tunes you are dragging:
and drag the files to the left-hand side of the Reaper track:





It will ask you if you want the files on a single or multiple track, click "NO" to put everything on a single track:




Now Reaper then lays down all the audio track side-by-side.  They appear red in this image because I have changed the colours in my environment.


The next step is to cross fade the selections.  The first stage is to trim off low volume parts of the music at the end (or start) of a musical selection.  Move your mouse to the edge of a song and when you see this cursor, click and drag the mouse left/right to trim the music:

TO:


Now start playing the music.  Doesn't matter were exactly, just that it has to be playing, and drag the music so that it overlaps, and let go of the mouse.  When you do the music position is moved a little to the left of the cross fade so you can hear the entire cross-fade. 

Listen to the fade to make sure it sounds correct, or shift the starting point/overlap until it sounds good.  Some times you have to turn snapping Off (Alt+S) to make it align better.

Now repeat the process for the entire set, and save the project.  Now listen to the set and make sure there are no glitches in the music and is what you want it to be.

Reaper Export for Announcer (Optional)

 This is the second half of the export required to seed the script in Second Life with accurate song, artist and album information.  Inside Reaper, after saving the project as an RPP file.  Save it again:

And save it as a "EDL TXT (Vegas) (*.TXT)" File type.  I prefix the file name with REAPER to differentiate it from the iTunes export files:

Like the iTunes export, save it again as TXT and use the Open With to open the file in Open Office.  This time open with semi-colons and make sure TAB is turned off!!

Delete all the columns except for:
  1. StartTime
  2. FileName


IMPORTANT PRIVACY NOTICE: Before continuing to the next step, have a look at the names contained within the Filename column.  Since this file will eventually be copied into Second Life, MAKE sure it doesn't contain any personally identifying information.  In my example, I use a separate hard-drive partition (P) to save details about my songs, but many people use "My Documents" and this often contains your real name.  My recommendation is to use a "replace" operation to change the name of any private information.  Whatever modifications you make, they have to be consistent, because the system matches against the FileName column in Reaper against the Location name in iTunes.  If they are not the same, the load fails.  See below.

Then do a save as "Text CSV (.csv)" and make sure Edit filter settings is turned on:

In the subsequent dialog make sure the Field Delimiter is a "~" and the Text Delimiter is blank:
Then Click OK to save the file.

Reaper to Shoutcast

Shoutcast is technology that takes an input (your music from Reaper) and distributes it to one or more listeners.  Reaper has a plug-in to enable this, and can be found here:


Download the appropriate plug-in for your Windows OS (32 or 64 bits).  And save it in the "plugins" directory for Reaper.

Next download the latest "lame_mp3.dll" encoder, which you can find here:


Install this in the same directory as the "reaper" application.  DO NOT install it in the plugins directory.


Now bring up the plug-in, by using the "Save Live Output to Disk" (Ctrl+Alt+B), which is found on the "File" menu.


This brings up an initial dialog where you select Shoutcast Source:


You have to click START to see the start parameters.  When you signup for a shoutcast service in second life you will get an IP, Host and Password.  Simply separate the IP and host with a colon, for example if the IP is "231.77.82.199" and the port is "4212", then Host:port is set to "231.77.82.199:4212".  Finally, set the appropriate password:

Connect and when you are connected, simply click play in Reaper and pat yourself on the back .. you are broadcasting!!

It does take 10-30 seconds for your music to leave your computer, be transmitted to the shoutcast server and rebroadcast to the Second Life residents.

Copying ITunes & Reaper Export to Second Life for Announcer (Optional)

The script works only with the files specified above.  For each set you copy the contents of the two CSV files you created previously, and copy them into a notecard.  In Windows, this is simply, open them in any text editor such as Notepad or Notepad++.

Once opened, in Notepad, press Ctrl+A (Select All) then Ctrl+C (Copy), to copy the text into the clipboard.  In Second Life, create a notecard.  The notecard name is either prefixed with one of these two to indicate it's type.
  • !ITunes-
  • !Reaper-
After the dash, you place the name of the set.  IMPORTANT, the name of the set must be the same on both files:
Open the notecard, and paste the clipboard contents (from Notepad) into the Second Life Notecard:

Repeat the process for the Reaper export file.

Now, make a copy of each of the "!Tunes" and "!Reaper" notecards in an object with the "!!Shoutcaster" script you acquired earlier.

Using the "!!Shoutcast Announcer" Script (Optional)


The "!!Shoutcaster" script uses the command line on channel "555" to work and only supports the Owner of the script, so somebody else typing these commands, beside yourself will have no effect on the script.  There are 4 commands, and they are listed in roughly the order you would use them.  The commands can be in upper and lower case.  For example "/555 Stop"
  • LOAD
  • DELAY
  • SYNC
  • STOP
LOAD tells the script to load a set from the notecards present.  Loading first loads the Reaper notecard which gives the start times and sequence of the tunes and then it loads the ITunes notecard which gets the song name, artist name and album information using the filename as the cross-reference between the two.  The name you provide is your set name:
  • /555 load Progressive Dance 1
    • Loads the "Progressive Dance 1" notecard for iTunes and Repear
DELAY is the combination of two numbers.  The default is 45 seconds.  The first number is the number of seconds it takes for your sounds to leave your computer, travel to the shoutcast server, then end up on your listeners computers.  In my case, this is about 25 seconds.  The second number is the number of seconds into the tune before the script identifies the song.  In this case, it is 20 seconds.  Total 45 seconds.

To change the delay, simply specify a new value.
  • /555 delay 33
Sets the new delay to 33 seconds.

SYNC is used to tell the script where in the song Reaper is currently playing.  You look at Reaper, and decide upon one of two formats for the SYNC command.  The timer contains beats and seconds, seperated by a "/".  We are interested in the value after the "/".  It accepts a time with minutes and seconds (MM:SS) or with hours too (HH:MM:SS):

Contains just the minute and seconds.  Ignore the stuff after the ".".  The sync command therefore is:
    /555 sync 12:24
Contains the hour, minute and seconds.  Ignore the stuff after the "." and the sync command therefore is:
   /555 sync 1:48:56

Since these commands are being entered as Repear plays, you will need to enter a value up to 10 seconds in the future, and count down your "ENTER" key press in Second Life when the time matches.  Once this occurs, the script will then play the current song that is playing according to Repear's current position and relative to the delay value you have specified earlier.

The SYNC command doesn't need to be incredibly accurate, it can be out by a few seconds, because different avatars in second life will receive your sounds at different times because their distance from the Shoutcast server.  This is why the default delay is 45 seconds and not 25.

STOP stops the script from broadcasting the current song.  Stop automatically happens after the last song is annouced.

Final Two Words

Have fun!

Followers